Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
(121 reviews)
Price: $152.66
In Stock
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
Item # UF48-979017
Our Price: $152.66
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (121)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
Ultra-Fab Products RV Skid Wheels - UF48-979017
- Hitch Mount
- Bolt-On
- 3 Inch Diameter Roller
- Ultra-Fab Products
Help prevent damage to your motorhome's undercarriage by mounting these steel wheels to your rear trailer hitch receiver. Rollers clamp around 2-1/2" x 2-1/2" square hitch tubing.
Features:
- Unique rollers clamp around the crossbar of your RV's rear hitch to help prevent tail dragging and digging in while backing up
- Mounting hardware included
- Heavy-duty steel construction is extra durable
Specs:
- Application: 2-1/2" x 2-1/2" square hitch tubing
- Roller diameter: 3"
- Quantity: 2 wheels
- 1-Year warranty
Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
48-979017 UltraFab Solid Steel Rollers - Hitch Mount - 2-1/2" Tubing
Video of Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultra-Fab Products Skid Wheels - Hitch Mount - UF48-979017 Review
Today we're going to review part number UF48-979017 this is the Ultra-Fab Hitch Mounted Steel Rollers for RVs with a 2-1/2" square hitch tube, this is for a quantity of 2. This part includes everything shown here on the table. It comes with the 2 skid rollers, the 2 mounting plates, the 4 U bolts, and then 8 lock nuts. These parts will help prevent damage to your motor home's undercarriage by mounting these steel wheels to your rear trailer hitch receiver. These unique rollers will clamp around the crossbar of your RV's rear hitch to prevent any tail dragging and digging in while backing up. Mounting hardware is all included.
They are made of a heavy duty steel construction which is extra durable. The wheels themselves are a solid steel so they do hold up very well. The specs on this again, it's designed to fit on a 2-1/2" by 2-1/2" square hitch tube. The diameter of these rollers themselves is 3" and the quantity is again for 2 of them. When you go to install these, what you do is start on one side of the hitch and you're going to drop these U bolts right over the top of your hitch tube. With those hanging down what you'll do is take your mounting plate, put it on top of your rollers and then just line those up, your U bolts will come right down through there.
This will be mounted around your square hitch tube, and then using the lock nuts you'll go ahead and put the lock nuts on and tighten it down to the right specs. The thing I do want to mention is once you get these installed after it's all installed you want to grease the bearings that are on the inside of these solid steel rollers on each one end there's a zerk fitting. What you'll do is get a grease gun, put it on that zerk fitting, then you can pump that grease into these solid steel wheels to help with the wear and tear on them. Just to give you a few dimensions on the mounting plate, the longest portion of it is going to be about 5-3/8", this is right at 4", then the measurement on the center to center on the holes is about 4-1/4" that way and this way is at about 3-1/8" that way. That should do it for the review of part number UF48-979017 these are the Ultra-Fab Hitch Mounted Steel Rollers for Rvs with 2-1/2" square hitch tubes. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2 - UF48-979017
Average Customer Rating: 4.8 out of 5 stars (121 Customer Reviews)
Help prevent damage to your motorhome's undercarriage by mounting these steel wheels to your rear trailer hitch receiver. Rollers clamp around 2-1/2" x 2-1/2" square hitch tubing.by: Brian03/15/2024
You will need a very small grease gun fitting to get grease into the zerk fitting for the bearing. The zerk fitting is surrounded by the nut bolt head on one end of the bearing shaft and my handheld grease gun does not fit into that tight space. Otherwise... as advertised.
by: Rick H03/21/2024
Got them attached to my hitch with no problem and had about 3/4 inch difference between the bottom of the wheel and the bar that was scraping. Tested today and they worked good and now no more divots in the pavement. Put them on a 2023 28 foot Forest River Forester
by: Hal07/21/2020
Received the heavy duty Ultra-Fab skid wheels from etrailer yesterday then easily greased and installed either side of the hitch receiver on our RV in about 20 minutes. They are very robust and I don't expect I'll have an issue with them falling apart after the first contact with a driveway or ferry ramp - or hopefully thereafter. As always, great service from etrailer as well!
by: Jose04/20/2023
Great Product
Jose
4/21/2024
Its a great product to prevent dragging your rv
by: Maurice03/26/2022
Just received the Ultra Hitch Mount Steel Rollers and I have not installed them yet. The online product details indicated that the rollers were to fit a 2 1/2 in hitch bar. The container/box indicates the rollers are for a 2.25 inch hitch bar. However, the distance inside the u-bolts is 2 3/4 inches. Therefore they should easily fit my 2.5 inch hitch bar. I will update my comment after installation.
Maurice J.
3/27/2023
They appear to be working fine.
by: Richard11/22/2020
The new rollers are much better than previous rubber coated wheels, of which one exploded. Installation was straightforward, but lacking the proper torque specification for the nuts on the instruction sheet. This is an important omission that the company should address for safety. They were torqued to xxlbs in a cross pattern on our unit. The selection of grease is important with the units facing a variety of weather, or road conditions. Regular grease, once wet, will deteriorate into sludge, and possibly cause the rollers to seize. Used lithium based grease that is water resistant. Suggest the overage of squeezed out grease on either side be wiped clean to lessen dust or dirt attraction on working surfaces. Less than a 5 star rating has nothing to do with the product, just the incomplete instructions.
by: John C07/22/2020
These skid wheels take a licking and keep on spinning. Because of the change of angle in my driveway, my Class A MH would drag its tail on the way out and when storing. Not anymore! A rock solid product.
by: Michele G07/08/2018
I have a carrier with ramp on the back of my Suzuki SX4. The back end scrapes on my driveway everytime I go in or out.
I mounted one of these wheels just ahead of the back end and now it rolls right over the end of my driveway, instead of gouging into the concrete.
It was the perfect solution for my little car.
by: Gordon S07/10/2018
Received my steel wheels today and installed them right away on our 2019 Four Winds class C motorhome Easy to install less than 15 minutes and they look great. Can't wait to see how they work.
by: Tail dragger07/11/2022
Very heavy weight. They appear to be able to handle the need of tail dragging my 43 foot 5th wheel. I haven't put them to the test just yet. planning on a trip soon and I can give more feedback afterwards. Only negative is that the inside edge of the wheel bracket is so close to the lock nut, it is difficult to keep the socket tight against the top plate to get a good torque on the nuts, socket slips off.
by: Michael05/22/2020
Excellent Service.
Easy installation.
Products worked great.
Solved my tail dragging issue due to driveway geometry issue entering a well traveled State Road.
Would purchase from you again.
by: Aaron 07/06/2023
Good quality, and product was as advertised on etrailer.
by: Gary12/12/2017
Just what my Diesel Pusher RV needed! Nearly every diesel pusher needs to have this product! I wish I would have had a pair of these on my rig 2 months ago. It would have prevented me from being stranded after leaving a fuel stop. What happened is upon leaving a fuel stop the back end dragged on the hitch (not a big deal) but what I didn't know is the fuel filter on the motor hangs down close to this same level, so it got crushed and quit feeding fuel to the motor. This wrecked a weekend of plans. But God had a divine appointment instead. These rollers would have prevented the fuel filter from being hit, because it would have raised up the back end about 3 inches!. I do question the zert fitting in this model it seems like a solid bolt would be stronger. But I will replace it if the current one fails.
Gary
12/12/2018
a year later. Still working well. I did drag at least one time with the rollers, they held up fine. Every Diesel pusher needs one of these in my opinion...
by: David10/08/2022
Missing the mounting plates, looks used and box was re taped. Was not even packaged. Usually better service than this.
Jenny N.
10/24/2022
Thank you for contacting us. I will have our customer service team reach out to you.
by: Kerry 09/07/2022
Excellent!! Installed these on the back of my 5th wheel to prevent drag. They bolted up perfectly onto the factory trailer hitch. Very robust and extremely heavy built
by: Lynn R.06/14/2017
Very high quality with rugged construction. Easy installation on my RV which had a tendency to drag the hitch receiver when going in and out of my driveway or transitioning from parking lots to street. No more dragging!! The rollers take the abuse with no trouble. Excellent product!
Lynn R.
6/14/2018
Working as expected!
by: Clark08/25/2019
This product was very easy to install. It has provided protection for the underside of our coach from hitting the ground on several occasions.
by: Billy S.04/30/2018
Had purchased the larger urethane skid wheels which broke the first time they hit the ground. Really wasn't expecting them to last on a 38' Class A, my driveway transition is steep and irregular surface at street.
These steel rollers have held up great, even when I forget and hit the transition too fast. I added a third steel roller to the bottom of the receiver hitch also.
All three have held up great.
by: Steven 11/29/2022
This is an excellent product. The application is perfect. The fit is as advertised. Provides great protection for Airstream travel trailer. etrailer has a great assortment of quality travel trailer assessories.
by: Joe 05/11/2020
My 30' Class A RV had the 6" cast iron casters on the rear hitch. Needless to say, they didn't like the angle of my driveway. After searching high and low, I found these monsters. They are sturdy, have a grease zerk, and couldn't be easier to install on your receiver hitch.. If you want a little more height out of them, you can get u-bolts and a piece of square bar or heavy gauge tubing to push them down a bit more as they aren't very tall. I also noticed a nylon washer on either side, which should NOT be an issue, but if it is, they are easy enough to replace. If these aren't bulletproof, I don't know what is. Also, Stacey A at e-trailer was AMAZING with helping me through my order issues. Stellar service and prices.
by: Charles 06/21/2020
First- Great speed shipping and better price than other online etailer!
Next; Good solid steel rollers with lubricated roller bearings. Steel plates appear to be plated, nickel or chrome. Good hard surface! I expect long life.
I noted that the inside tube used for the bearing is somewhat short. If the bolt is tightened to contact the inside tube, the wheel doesn't roll. It's pinched against the support. I inserted a small washer acting as a shoulder to provide enough clearance for the wheel. Now I can clamp the tube to keep it from turning. Thus, the roller bearings will take the load as intended.
I painted the plates and U-bolts to match my trailer hitch.
Assembly looks easy! Bolt on.
by: Anthony04/08/2018
Theses are heavy duty and very easy to install. Appear to be high quality and have lasted a year without issue. I bought these because of scraping the bottom of the hitch on my motorhome especially when backing up and pulling out of my sloped driveway and these definitely have helped. Easy to lube as well with a hand pump grease gun.
by: Spockman7302/22/2015
Very well designed and built - the insides of the steel casters are full-length needle bearings with an internal race, which for this price, I was NOT expecting! As good as 'the other brand' which costs over twice as much! As a retired Engineer, I guarantee these things will take a SLOW 25000+ pound load with NO problems! Most likely, a LOT more! The only downside; the Zerk grease fitting is inside the head of the bolt, and my standard size grease coupling could not 'lock on' the fitting. So, I just took the things apart and hand-packed the bearings, which is probably better anyway since now I KNOW the bearings are all greased properly! But, I do have a small diameter Lincoln coupler (#5852) on order which should fit. I am very, very pleased with this product.
by: Bob B09/30/2016
These heavy duty hitch rollers are the answer to avoiding extensive damage to the rear of the motorhome. I like the fact that they have greese zerks.
Robert B.
10/1/2017
Still working flawlessly . Dont have to worry about steep drivways anymore.
by: Paul07/22/2021
Exactly what I needed and stoutly built. Delivery time was super quick to Canada. Will definitely look to etrailer again for my RV needs
Paul B.
7/23/2022
super
25
121
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV Skid Wheels
- Will Ultra-Fab Hitch-Mounted Steel Rollers # UF48-979017 Fit on 2013 Palazzo 33.2 Foot Motor HomeThe Ultra-Fab Hitch-Mounted Steel Rollers # UF48-979017 can be used for your 2013 Palazzo 33.2 Foot motor home. They do not have a specific weight capacity since they are not intended to sustain weight for long periods of time. For larger Class A motor homes, you might want to go with the Ultra-Fab Skid Wheels # UF48-979012 due to their larger wheel diameter and the fact they extend down more than 7 inches.
view full answer... - Steel Skid Rollers For Trailer Tongue That Scrapes DrivewayI have a couple of solutions for you, I will link the parts below: **Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2 # UF48-979017. *Ultra-Fab Steel Jumbo Roller for Trailers and RVs - Weld On - 2-1/2" Wide x 3" Tall # UF48-979023. If you have a large enough square cross beam on your trailer tongue the hitch mounted roller will work for you. This particular roller uses u-bolts that mount perpendicular to the direction of travel. If you do not...
view full answer... - Recommended Solution For A 2014 Primetime LaCrosse 318 BHS That Scrapes The Ground You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid Wheels # UF48-979012. These wheels have brackets that will weld onto the frame and allow you to bolt on the wheels so that if the wheel ever wears down you can easily replace it.
view full answer...
- Mounting Bracket/Wheel Height Dimensions for Ultra-Fab Hitch Mounted Steel Rollers # UF48-979017As shown in the linked photo that I have prepared for you the bracket dimensions on the Ultra-Fab Hitch Mounted Steel Rollers # UF48-979017 are 4-inches x 5-3/8-inches. The height from the bottom of the roller wheel to the top of the mounting flange is 3-inches. This roller wheel fits 2-1/2- x 2-1/2-inch square hitch tubing and includes hardware.
view full answer...
- Skid Wheel Options for 2020 Forest River Cedar Creek Champagne Fifth WheelWe do have skid wheels available that do not swivel. However, they are not 5" diameter wheels. I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs, # UF48-979023 with a 2-1/2" wheel that stands 3" if you want a weld on option. If your 2020 Forest River Cedar Creek Champagne Fifth Wheel has a receiver hitch mounted, I suggest ether the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 3" tubing, # UF48-979018 or # UF48-979017 if you have 2-1/2" tubing.
view full answer... - Recommended Frame-Mount Skid Wheels for 2015 Airstream Sport 22 Travel TrailerAccording to images and specs on the Airstream website their 22-foot Sport Series travel trailer does not have a rear hitch to allow attachment of hitch-mount skid wheels like the Ultra-Fab Hitch Mounted Steel Rollers # UF48-979017 so instead you'll want to select a frame-mount skid wheel that can be bolted or welded on the trailer frame. The linked page will show you all frame-mount skid wheels and you can select bolt-on or weld-on installation using the filters on the page. This will...
view full answer... - Is There a Longer U-Bolt Kit For Ultra-Fab Skid Plate UF48-979017There is not a longer U-bolt made for the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing # UF48-979017. I looked and we don't have any other U-bolts that will work, but if you can find some longer than the 3-1/2" length, they need to measure 2-3/4" inside-to-inside.
view full answer... - Solution To Prevent My 2022 Jayco Pinnacle From Bottoming OutThanks for the pictures! The Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing # UF48-979017 would work great for your 2022 Jayco Pinnacle 38FLGS, and would eliminate the dragging you're experiencing. Adding the Roadmaster Rollaway Trailer Hitch Protector # RM-050 that you mention is not necessary as the steel rollers will prevent the hitch from bottoming out.
view full answer...
- Installed Height of Ultra-Fab Rotating Hitch-Mounted Skid Wheels UF48-979014The Ultra-Fab Rotating Hitch-Mounted Skid Wheels # UF48-979014, once bolted on the hitch tube on your Class C RV, will extend down from the bottom of the hitch tube by 6-inches. This includes the thickness of the bottom mounting plate all the way down to the bottom edge of the wheel itself. You can see this illustrated in the linked photo that I prepared for you. This kit is also shown in the linked video. All of our RV skid wheels are shown on the linked page. These include weld-on and...
view full answer...
- How To Find the Correct Skids Wheels for an RVIn order to choose the correct set of skid wheels you'll need to measure the square body on the trailer hitch and then choose the correct ones based on that. The Ultra-Fab Hitch Mounted Skid Wheels part # UF48-979017 for example are designed for a 2-1/2" square tube and the part # UF48-979018 are designed for a 3" square tube. If you have one of these two then the wheels will work well although they are technically designed for motorhomes The Ultra-Fab Rotating, Hitch Mounted Skid Wheels...
view full answer... - Dimensions of U-Bolts Included in Ultra-Fab Skid Wheel Kits UF48-979017 and UF48-979018I pulled one of each of the Ultra-Fab skid wheel kits you referenced, parts # UF48-979017 and # UF48-979018, so that I could take the measurements of their mounting u-bolts. Skid wheel kit # UF48-979017 fits 2-1/2 x 2-1/2-inch square hitch tubing. Its u-bolts use 3/8-inch diameter stock; their inside overall length is 2-3/4-inches; the threaded portion alone measures 2-inches. Please refer to the linked photo. Skid wheel kit # UF48-979018 fits 3 x 3-inch square hitch tubing. Its u-bolts...
view full answer...
- Best Skid Wheel For Hitch Mounted Mobility Scooter LiftIf you're looking for a bolt on solution, I recommend going with the Ultra-Fab Hitch Mounted Steel Rollers # UF48-979017 which are designed for 2-1/2" hitch receivers. While these are designed to be used at the rear of your RV on a hitch, I believe they will also provide you with the appropriate solution on your receiver mounted on the back of your vehicle. There are some much better options that are weld on options- like the Ultra Fab Steel Roller # UF48-979023 , which is 2-1/2" wide....
view full answer... - Skid Wheel Recommendation for 40 Foot Class A Diesel PusherWhile we carry some very solid products when it comes to skid wheels, such as the Ultra-Fab Hitch Mounted, # UF48-979017 that you linked to and the even stronger Ultra-Fab Skid Wheels for Class A RVs 34' and Longer, # UF48-979013; these are not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome. I reached out to someone in the Ultra-Fab Engineering Dept. for suggestions, he stated that they do not produce anything that listed as surviving...
view full answer...
- Skid Wheels for 2016 Coachmen Concord 300DSHow much lower does the jack sit than the trailer hitch? A hitch mounted skid wheel like the # UF48-979017 could work but these are going to hang down about 3 inches or so. Or a better option would be the Skid Wheels for Low Profile RVs part # UF48-979011 which hang down 5-3/4 inches.
view full answer... - Are There Drop Brackets for the Ultra-Fab Skid Wheels for Class A RVsI do have an option for you but we don't offer any mounting brackets for the Ultra-Fab Skid Wheels for Class A RVs part # UF48-979013. That said, you could always make your own but this could also weaken the attachment point so I recommend mounting them elsewhere like the trailer hitch using an option such as the Ultra-Fab Hitch Mounted Steel Rollers for RVs part # UF48-979017 or part # UF48-979018.
view full answer... - Skid Wheels Compatible with Class C Motorhome and 3x3 Inch Square Hitch TubingI'm glad you've been so pleased with the skid wheels. I was able to check your past invoice and the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 3" Hitch Tubing - 3" Diameter - Qty 2 # UF48-979018 is the product you are looking for on your Class C Motorhome. You can just forward this link to your friends with the same motorhome and they will be sure to get the correct fit. Thanks for using us and sharing with your friends!
view full answer... - Are Skid Wheels Recommended For A Newmar Ventana 35' Diesel Motorhome Ultra-Fab makes a few variations of these skid wheels but they don't recommend them for diesel motorhome's due to the extreme weight in the rear. You could still try using some skid wheels but there's a good chance you'll overload and break them. The # UF48-979017 skid wheels are designed to clamp onto a 2-1/2" x 2-1/2" square tube hitch, which would make them easier to install or swap out in the event that they break. If you don't have a trailer hitch this size then you'd need to go with...
view full answer... - Available RV Skid Wheels for Frame and Hitch MountingSkid wheels should not be mounted to an RV bumper, especially to one that was added as an aftermarket item. Skid wheels need to be mounted to the frame or to a hitch that is mounted to the frame. No RV bumper is rated for the kind of impact a skid wheel is intended to withstand. Your hitch mounted skid wheel like # UF48-979020 is your best bet.
view full answer... - Will Force on Hitch when Using Ultra-Fab Hitch Mounted Steel Rollers Damage Hitch or RVIf you are going slow in your drive (or anywhere you might suspect is too steep) then using the skid wheels, # UF48-979017, will not damage anything. The damage would come from a sudden hard impact and even then it would have to be a pretty major impact to damage the hitch or RV.
view full answer... - Skid Wheel Recommendation that Won't Damage Black Top Driveway for a 23 Foot RVTo avoid scraping up your driveway I recommend going with the urethane wheels such as # UF48-979014 or # UF48-979015 because they are much less likely to damage the driveway compared to steel rollers. The steel rollers you mentioned are all basically the same with the exception of the sizes of each. But they are a little more low profile so they would not make contact with the ground as soon as the urethane coated wheels.
view full answer... - Looking for Small Diameter Skid Wheels for Rear of Aluminum TrailerWhat you're looking for are referred to as skid wheels, which are used on the rear of a trailer to prevent the back of the trailer from bottoming out. The smallest diameter skid wheels we offer have a 3 inch diameter, part # UF48-979017 which mounts to 2-1/2 inch square tubing or # UF48-979018 for 3 inch square tubing. As far as isolating the aluminum frame members from the steel housing and mounting hardware, we don't sell anything specifically designed for that task for this product,...
view full answer... - Choosing Between Ultra-Fab Skid Wheels UF48-979017 and UF48-979014If it were me I would go with Ultra-Fab Rotating, Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 Item # UF48-979014 because the wheels can swivel. On Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2 Item # UF48-979017 the wheels are fixed. Having wheels that can swivel means they are more effective if you are not traveling in a straight line!
view full answer... - Quantity of Ultra-Fab UF48-979022 Weld-On Mini-RollerThe # UF48-979022 steel mini-roller is sold individually. If you wanted a pair, you'll want to order two of them. For a bolt-on application, take a look at # UF48-979017 which is sold in pairs. If you click the provided link, you can see product description videos for both parts.
view full answer... - Recommended Skid Wheel For Boat Trailer with Cross Member 2" Wide and 4" TallYou might be able to use longer U-bolts with the # UF48-979017 but I recommend instead using the Ultra-Fab Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 # UF48-979015 since the bolts have a usable length of 5" so they'll fit on the 4" tall crossmember. It's essentially the same part but just installs a bit different. The wheel is 4" diameter, so it should work fine with 6-1/2" clearance. I've linked a review video of these that I recommend having a look at.
view full answer...
Do you have a question about this RV Skid Wheel?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Hal
7/22/2021
A year later and still like new and working great.